Pic 1 The original inlet using adapted air inlet cowel simple inlet with control ball valve
Pic 2 The new mixing chamber using inlet pipe from experiment 1
the in let to the mixing chamber is a 1/2" cut at an angle of approx 55deg with open end facing downwards. Stationary impeller is centre of chamber
Pic 3 & Pic 4 making of mixing chamber
Pic 5 details of impeller
Vid 6 short video of test, note blue-grey smoke with biogas, turn off gas black smoke.
Thank you for good information. I am currently running
ReplyDeletekimchi factory and using diesel generator set as well.
I have experienced great improvement in sales revenue as
productivity increased since the introduction of diesel generator set.
:) just in case, the generator i am using can be
found at here-> Here
Thanks for sharing this blog.I like this blog very much. really such an nice and decent information shared here and used buy all brands of car parts, truck parts for car or truck part; Rubber Bush Suppliers | Toyota Bushing
ReplyDeleteEngine Mounting Parts
Engine Mounting Manufacturers